Uniconta MCP

Specific terms for Uniconta's MCP server

11 November 2026 – Version 0.1

These terms (the “MCP Terms”) are specific terms within the meaning of clause 1.3.1 of Uniconta's end-user licence agreement (the “EULA”) and apply between Uniconta A/S, Danish company registration (CVR) no. 33266928 (“Uniconta”), and the customer (the “Customer”) to the Customer's use of the MCP server. The MCP Terms are presented when the Customer activates the MCP server and must be accepted before the MCP server may be used.

1. Application

1.1 The MCP Terms supplement the EULA and form part of the agreement between Uniconta and the Customer. This also applies where the Customer receives the service through a Uniconta Partner or Uniconta Distributor.

1.2 In the event of a conflict, the MCP Terms take precedence over the EULA in relation to the use of the MCP server. Terms not defined in the MCP Terms have the same meaning as in the EULA.

1.3 The MCP Terms are accepted upon activation of the MCP server. The person accepting them warrants that they have authority to bind the Customer.

2. Definitions

“MCP server”: Uniconta's server based on the Model Context Protocol, which gives external tools access to the Customer's data in the service.

“external tools”: any MCP client, AI assistant, AI agent, automation platform or other service, including underlying AI models, that the Customer connects to the MCP server.

“third-party provider”: the provider that makes an external tool available.

“MCP data”: the Customer's data, including personal data and accounting records, that is accessed, transferred, created, changed or deleted through the MCP server.

“access credentials”: usernames, passwords, tokens and other credentials that provide access to the MCP server.

3. Access and user permissions

3.1 The MCP server is accessed using the Customer's users in the service. An external tool has the same access as the user it is connected with. The Customer is responsible for assigning and limiting user permissions so that external tools are not given more access than necessary. External tools are considered third parties to whom the Customer has granted access, as referred to in clause 1.3.2 of the EULA.

3.2 Any action performed through the MCP server using the Customer's access credentials is deemed to have been performed by the Customer and is binding on the Customer.

3.3 The Customer must immediately disconnect an external tool from the MCP server if the tool is no longer used, if there is reason to suspect that the tool or access credentials have been compromised, or if a user should no longer have access.

3.4 Access credentials and non-public information about the MCP server are confidential. The Customer must not disclose them beyond what is strictly necessary to connect an external tool or what is required by law.

4. External tools

4.1 The Customer chooses which external tools to connect to the MCP server. External tools are third-party solutions as referred to in clause 10.3 of the EULA. The relationship between the Customer and a third-party provider is governed solely by the agreement between them. Uniconta is not a party to that agreement and has neither control over nor responsibility for the third-party provider's processing, storage or protection of MCP data, or for content, responses or actions from external tools.

4.2 The Customer is responsible for ensuring that the transfer of MCP data to an external tool is lawful, including transfers of personal data to countries outside the EU/EEA, and that the third-party provider provides an adequate level of protection.

4.3 The Customer may only use the MCP server with external tools, MCP servers and other services that the Customer has assessed as trustworthy. The Customer acknowledges that other services or content in the same session may cause an external tool to extract, disclose or change MCP data contrary to the Customer's intentions.

4.4 Uniconta does not guarantee that the MCP server is compatible with any particular external tool.

5. Changes to data through external tools

5.1 To the extent that the MCP server allows data to be created, changed or deleted, the Customer acknowledges that external tools may misunderstand instructions and perform incorrect or unintended actions, including in bookkeeping, invoices and master data.

5.2 The Customer is solely responsible for checking and approving actions performed through the MCP server and for maintaining appropriate control, backup and reconciliation procedures.

5.3 Uniconta has no obligation to reverse or restore data created, changed or deleted through the MCP server.

6. Data, data processing and bookkeeping

6.1 The Customer is the data controller for personal data accessed or transferred through the MCP server. Uniconta only makes MCP data available to the external tool connected by the Customer. Once MCP data has been transferred to an external tool, Uniconta has no responsibility for that data.

6.2 The Customer's use of third-party providers to process MCP data is not covered by the data processing agreement in Appendix 1 to the EULA. Disclosure through MCP takes place on the Customer's instructions under Appendix 1, while any subsequent processing is the Customer's responsibility, and third-party providers are outside Uniconta's data processing chain.

6.3 The Customer is responsible for ensuring that accounting records created or changed through the MCP server comply with the requirements of the Danish Bookkeeping Act. Clause 5 of the EULA concerning the Customer's data otherwise applies correspondingly.

7. Operation, changes and fees

7.1 The MCP server is provided as is, without any guarantee of availability, freedom from errors, fitness for a particular purpose or the accuracy of responses and actions from external tools. Clause 6 of the EULA concerning operation and clause 2.4 concerning support apply correspondingly.

7.2 Uniconta may at any time change, restrict, suspend or discontinue the MCP server in whole or in part, as referred to in clause 7.1 of the EULA. Uniconta may suspend the Customer's access to the MCP server without notice if misuse, a security risk or a breach of the MCP Terms is suspected.

7.3 Uniconta may introduce fees for use of the MCP server in accordance with clause 3.6 of the EULA.

7.4 Uniconta may amend the MCP Terms in accordance with clause 15 of the EULA.

8. Liability and indemnification

8.1 Uniconta is not liable for losses resulting from (a) content, responses or actions from external tools, (b) third-party providers' processing of MCP data, (c) MCP data after transfer to an external tool, (d) the creation, alteration or deletion of data through the MCP server, or (e) unauthorised use of the Customer's access credentials.

8.2 In all other respects, clause 10 of the EULA applies, including the limitation of liability in clause 10.4.

8.3 The Customer must indemnify Uniconta against any claim from a third party, including data subjects and public authorities, arising from the Customer's use of the MCP server or external tools in breach of the MCP Terms or applicable law.

9. Rights and feedback

9.1 Uniconta retains all rights to the MCP server, as referred to in clauses 1.1 and 8 of the EULA. The Customer acquires no exclusivity, and Uniconta may freely develop and offer solutions that resemble or compete with the Customer's own integrations.

9.2 Uniconta may freely use suggestions, error reports and other feedback from the Customer about the MCP server, free of charge and without any time or geographical limitation. Uniconta has no obligation to use such feedback.

10. Governing law and disputes

10.1 Clause 16 of the EULA concerning governing law, mediation and jurisdiction applies to the MCP Terms.